User's Manual Part 2

錯誤! 尚未定義樣式。
Wireless Networking Gateway System Manual
3-59
Reboot
To reboot the system, click Reboot in the menu list. The following
message appears.
Figure 58: Reboot
Click OK to reboot, or Cancel to continue working.
NOTE
Most of the configurations performed, require to reboot the system for them to take
effect.
DRAP
Used for registration to the Base Station to which the SU is connected
(by performing "Discovery"). The Network Gateway's WAN IP must be in
the same subnet as the Base Station.
Figure 59: DRAP Protocol
Set the following parameters:
 DRAP – Select Enable/Disable to enable/disable this feature.
 DRAP Server IP Address
刪除: Set TCP/IP Protocol
for Working with NAT
Router
刪除: Wizard