User's Manual

Table Of Contents

In addition, the user can allocate the IP by himself as below:

Step 1: Find the Internet Protocol (TCP/IP) Properties from the My

Network Places and check the Properties of Local Area Network

Connection. And click the “General” icon and assign one IP address which

can be from 192.168.123.1 to 192.168.123.253. Here we use the

192.168.123.88 as the IP address. The Subnet mask must be

255.255.255.0, and the Default gateway must be 192.168.123.254. Then

click “OK” button to complete TCP/IP setup.

Step2: Open the DOS command from the Start Menu->Run, and type “cmd”

then click OK.