User's Manual

38
option to receive an automatic IP address and subnet mask
assignment.
9 Server: The MGB100 will be a DHCP server on the network.
9 Auto: Select this option to let MGB100 send out a DCHP
request during boot up. If you have a DHCP server on the
network, the MGB100 will receive an automatic IP address
and subnet mask assignment. If no DHCP server on the
network, the MGB100 will be a DHCP server on the network.
9 Static: You can manually configure the IP address and subnet
mask.
z Server Setting:
9 Subnet Mask
9 Low IP and High IP: decide the IP address range that DHCP
server could offer.
9 Primary DNS / Secondary DNS: This feature allows you to
assign DNS Servers. You could get this information from your
ISP.
9 Gateway: The gateway IP address would be the IP address
of an alternate Gateway. If you do not know how to set up the
Gateway, leave this option blank.
9 Client List: When MGB100 is as a DHCP server, here will
show some information of DHCP client.
9 Fixed Mapping: DHCP server can assign the same IP
address to a certain “MAC address”.