User's Manual

- 17 -
4-2 Authentication & Security
As shown in picture. When the Encryption feature is enabled, the other setups are same as the said
WEP setting.
1. Authentication Type: There are three type of authentication modes supported by RaConfig.
They are open, Shared, WPA-PSK and WPA system.
2. 802.1x Setting: It will display to set when user use radius server to authenticate client certificate
for WPA authentication mode. The detail operation will explain in section 5-6 Configure
connection with WPA by 802.1x setting
3. Encryption Type: For open and shared authentication mode, the selection of encryption type are
None and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK authentication mode, the
encryption type supports both TKIP and AES.
4. WPA Pre-shared Key: This is the shared secret between AP and STA. For WPA-PSK and
WPA2-PSK authentication mode, this field must be filled with character longer than 8 and less
than 32 lengths.
5. WEP Key: Only valid when using WEP encryption algorithm. The key must matched AP   key.
There are several formats to enter the keys.
i. Hexadecimal40bits10 Hex characters.