User's Manual

- 25 -

4-6 Advance Page

The advance setting is shown as follows. The description of each session is said as following:

1. Wireless mode: Select wireless mode. 802.11B only, 802.11 B/G mixed 802.11A only, 802.11

A/B/G mixed and 802.11G only modes are supported.

2. 11B/G Protection: ERP protection mode of 802.11G definition. User can chosse from Auto, On,

and Off

i. Auto: STA will dynamically change as AP announcement.

ii. On: Always send frame with protection.

iii. Off: Always send frame without protection.

3. TX Rate: Manually force the Transmit using selected rate. Default is auto.

4. CCX2.0: support Cisco Compatible Extensions function:

i. LEAP turn on CCKM

ii. Enable Radio Measurement: can channel measurement every 0~2000 milliseconds.

5. Tx Burst: Ralink’s proprietary frame burst mode.

6. Wireless radio signal control

: means to open the wireless radio signal and show simultaneously:

: means to close the wireless radio signal and show simultaneously: