User's Manual

Using Your Remote Starter

Remote Start Ready Mode - Manual Transmission Vehicles Only

To activate the remote start function, the system must rst be in Remote Start Ready

Mode. Follow the steps below to enter remote start ready mode.

1. While the engine is running by the ignition key;

a. Place the transmission in neutral.

b. Set the parking brake

2. With your foot off the brake pedal, press and release the button to

activate the remote start. The LED will ash 3 times and the parking

lights will turn on to conrm the system has remote started.

3. Remove the keys from the ignition, the vehicle will remain running.

4. Exit the vehicle and close all vehicle doors.

5. Within 1 minute of step 1, press the button to lock the vehicle’s

doors. The vehicle will shutdown and sound 2 short chirps then 1 long

chirp to conrm ready mode is set.

Remote Start Ready Mode must be enabled if your vehicle is equipped with a

manual transmission.

Cancelling Remote Start Ready Mode - Manual Transmission Vehicles Only

The system will exit remote start ready mode if any of the following occur:

Open any door

Open the hood or trunk (if connected)

Press the brake

Release the parking brake

Turn the ignition ON