User's Manual

Using the “Quick-stop” Feature

If you want to make a short stop and keep your vehicle running (to keep the interior

warm or cool), the quick-stop feature allows you to do this while keeping your vehicle

secure and your keys with you.

To engage Quick Stop:

1. Stop the vehicle and place the transmission in PARK.

2. With your foot off the brake pedal, press and release the button 2

times within 2 seconds. The LED will ash 3 times to conrm quick

stop is entered.

3. Remove the keys from the ignition and exit the vehicle. Press the

button to lock the vehicle’s doors if desired.

To engage Quick Stop - Manual Transmission Vehicles:

1. With the vehicle running, foot off the brake, parking brake set ON.

2. Press and release the button to activate remote start.

3. Exit the vehicle close all doors (Door Open/All Doors Close)

4. Press and release the button.

5. Within 3 seconds press the button:

The unit enters Quick Stop Mode and will remain running

until remote start time-out and then shut down. (Remote Start Ready

Mode is NOT active)

Note: Do not leave children or animals unattended in the vehicle when using the

quick-stop feature.