User's Manual

Model XRO-9100
SELECTABLE FEATURES
The selectable features can be set manually as explained below,
Factory default settings are indicated by bold text.
Note : The method of manual override can either be selected to operate from the valet switch or operate as
custom code.
Be certain to place a check mark indicating the method used in the box located on the last page of the
owner’s manual.
NOTE: Keyless Entry Models with no horn output will Flash the Parking Lights instead of chirp where chirp is
indicated.
RF Programmable Feature Bank 1 Is For Transmitter Programming See Transmitter Programming
Guide.
RF Programmable Features Bank 2 Is Alarm Selectable Features:
Feature
Selection
1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps
1st Door L/UL
1 Sec.
3.5 Sec.
1 Sec L,
Dbl.U/L
Dbl L, 1 Sec
UL
Dbl L, Dbl UL
1 Sl/350ms
UL
2nd Accy Lock Auto Lock On
Auto Lock
Off
3rd Accy. Ul Auto UL Dr. Auto UL ALL
Auto UL Off
4th Headlights On Arm On Disarm
On Both
Off
5th Passive
Locks
Passive
Active
6th Pass/Act Arm Passive Arm
Actime Arm
7th Siren/Horn
Siren/Horn
Siren Only Horn Only
8th Horn Chirp 10 ms
16 ms
30 ms 40 ms 50 ms
9th O/R Method Custom Code
Valet
10th 2 Step U/L On Arm
Off
11th Chp Del Tx On Arm
Off
12th
Volts/HdWire
Not Available
13th Trigger
Circuits
Not Available
14th L/UL Poll Not Available
To exit program mode, turn ignition off, or press and release valet
switch.
RF Programmable Features Bank 3 Is Remote Start Selectable Features :
Feature Selection
1 Chirp 2 Chirps 3 Chirps 4 Chirps 5 Chirps 6 Chirps
1st Defrost Output
Pulsed
10 Mins
2nd RF Start Chirp Off
On
3rd Run Time 5 Mins
10 Mins
15 Mins 20 Mins
4th Parking Lights
On Steady
Flashing
5th Input Check Voltage
Tach
DBI Tach
6th Voltage Level
>0.5V B4
Start
<0.5V B4
Start
7th Ing. 2 Select
Off During
Crank
On During
Crank
Same Aas
Accy.
12