User's Manual

8th Ign. 3 Select
Off During
Crank
On During
Crank
Same Aas
Accy.
9th Diagnostics
Off
On
10th Crank Time 0.8 Sec
1.0 Sec
1.5 Sec 2.0 Sec
11th Gas / Diesel
Gas
Diesel 10 Diesel 15 Diesel 20 DBI
12th Transponder
O/P
While R/S On
During Start Until Ign. Off
13th Temp Start
Off
On
14th Crank
Averaging
Averaging
Preset Time
(NOTE:When Averaging, the engine must be started 4 times
with the key to be effective)
15th R/S Shock
Shunt Until
Clear
Shunt R/S
Cycle
Shunt From
TX
16th Turbo Select
Off
3 Mins 5 Mins 10 Mins
17th Black /Blue
(Aux O/P)
Single Pulse
As Feature #1
Note : Once you enter the feature programming mode, do not allow more than 15 seconds to pass between
steps or the programming will be terminated.
Chirp Function Parking light Function
1 chirp Arm 1 flash Arm
2 chirps Disarm 2 flashes Disarm
3 chirps Arm/ Door opened 3 flashes Disarm / Intrusion
4 chirps Disarm / Intrusion Constant On * Under Remote Start *
LED Function LED Function
Off Disarmed 1 flash... pause Zone 1 /
Slow Flash Armed 2 flash... pause Zone 2 /
Rapid
Flashing
PassiveArming/ Active
Rearming
3 flash… pause Zone 3 /
On (Solid) Valet Mode
* Depend on programming feature select
Transmitter Button System Function Remark
Lock Doors & Arm System / Button
- Defeat the Pre-detect stage of s/s
- - Defeat the Pre-detect and full detect stages
of s/s
- - - City Mode
or
(3-second)
Activate Panic function Press and Hold for 3 sec.
or
(3-second)
Stop Panic function Press and Hold for 3 sec.
(2-second) Silent Arming Activate during programming
(2-second) Silent Disarming
Unlock Doors & Disarm System / Button 2
- Two Steps Door Unlock & Disarm System Press twice within 3 sec.
Trunk Release Press and Hold for 2 sec
- Turn Off Remote Start Press twice within 2 sec.
- Turn On Remote Start Press twice within 2 sec.
Channel 1
13