User's Manual

E- P1- 4. “DEMO MODE”:
Spin down the
switch
to the page 1
Press the button 4 to
start Demo movie
Demo movie playing
Press the any Button to
exit.
E- P2- 1. “POWER SAVE” SETTING: Example set the “Power Save Enable”.
While the power save mode, the LCD remote transceiver uses “0” current to save the battery power.
Spin down the
switch
to the page 2
Press the button 1 and it
will display previously
setting.
Press the button 1 to
change the setting.
Press the
button and
the setting is done.
E- P2- 2. “PARKING METER” SETTING: Example set the “Parking Meter 30 min..
Note: When “parking meter” trigger presses any button to stop the beeper.
Spin down the
switch
to the page 2
Press the button 2
Press the button 1 three
times to set the parking
timer to 30 minutes.
Press the
button to
start the parking meter
and the
icon will
flash on the main page.
D - P2- 3. “PARKING AREA” SETTING: Example set the “Parking Area.” to “B120
Spin down the
switch
to the page 2
Press the button 3, it will
display previously
parking area
Press the button 2 to
clear the parking area,
and the “
-” flashes for
setting.
Spin up the
switch to
setting the “B”
Press the button 1 and
the “
-” flashes for
setting.
Spin down the
switch
to set the “1”
Press the button 1 and
the “
-” flashes for
setting.
Spin down the
switch to set the “2”.
8