Technical Specifications

NEW YORK GEORGIA TEXAS NEVADA
Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: [e-mail]. For Smart Fabrication™ Quotes, Email To: [e-mail] or Fax To: 631-586-2933
Item #: Qty #:
Model #:
Project #:
B-10a
FEATURES:
One piece Deep Drawn sink bowl design.
Sink bowl is 10" x 14" x 5" deep.
S
tainless steel Apron bolts to sink. Apron conceals plumbing on all
three sides.
Faucet activated by push of front panel.
Hot water adjustment valve accessed by raising front of panel.
All sink bowls have a large liberal radii with a minimum dimension of
2" and are rectangular in design for increased capacity.
"Hands Free" splash mounted gooseneck faucet furnished with aerator.
Keyhole wall mount bracket.
Stainless steel basket drain 1-1/2" IPS.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to a satin finish.
Die formed Countertop Edge with a 3/8" No-Drip offset.
One sheet of stainless steel - No Seams.
MATERIAL:
Heavy gauge type 304 series stainless steel.
Wall mounting bracket is galvanized steel and of offset design.
All fittings are brass / chrome plated unless otherwise indicated.
MECHANICAL:
Faucet supply is 1/2" IPS male thread hot and cold.
Faucet is barrel type and is activated by pushing the front of panel.
(Contractor on site must connect faucet to knee operated valves.)
7-PS-44
Keyhole Bracket for
easier installation
and greater stability.
STAINLESS STEEL
HAND SINKS
PANEL VALVE
For Replacement Faucets & Upgrades, Drains & Accessories
visit our website at www.advancetabco.com
Standard Faucet conforms to NSF 61 Standard 9. An optional
faucet upgrade is required for compliance to AB 1953 Standards.