Technical Specifications
Item #: Qty #:
Model #:
Project #:
STAINLESS STEEL
HAND SINKS
PEDESTAL BASE
B-4
NEW YORK GEORGIA TEXAS NEVADA
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
FEATURES:
One piece Deep Drawn sink bowl design.
Sink bowl is 10" x 14" x 5"*.
(*7-PS-18 sink bowl is 14" x 16" x 6")
All sink bowls have a large liberal radii with a minimum dimension of 2"
and are rectangular in design for increased capacity.
Keyhole wall mount bracket.
Stainless steel basket drain 1-1/2" IPS.
Flush-to-wall unit.
"Hands Free" splash mounted gooseneck faucet furnished with aerator.
Foot Pedal Valve for water operation.
Easy removable panel to access hidden plumbing.
Specific Features:
7-PS-95 towel dispenser with hinged towel box. Unit uses standard
C-fold towels. Liquid Soap dispenser.
7-PS-99 towel dispenser & soap dispenser plus trash
receptacle & cabinet storage.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent surfaces and to a
satin finish.
Die formed Countertop Edge with a No-Drip offset.
One sheet of stainless steel - No Seams.
MATERIAL:
Heavy gauge type 304 series stainless steel.
Wall mounting bracket is galvanized and of offset design.
All fittings are brass / chrome plated unless otherwise indicated.
MECHANICAL:
Faucet supply is 1/2" IPS male thread hot and cold.
Single pedal mixing valve with brass & rough chrome plated with built in
check valve. Front operated temperature adjustment.
(Contractor on site must connect faucet to foot pedal operated valves.)
7-PS-90
7-PS-95
7-PS-99
7-PS-18
K
eyhole Bracket for
easier installation
and greater stability.
For Replacement Faucets & Upgrades, Drains & Accessories
visit our website at www.advancetabco.com
Standard Faucet conforms to NSF 61 Standard 9. An optional
faucet upgrade is required for compliance to AB 1953 Standards.