Installation Instructions for Premium Wall Mounted Hand Sinks

CHECK FOR CONCEALED DAMAGE

FILE CL

AIM WITH DELIVERING FREIGHT CARRIER

Sinks manufactured by ADVANCE TABCO

are designed and constructed for the use of

liquid containment. Suggested applications: Hand Washing. ADVANCE TABCO

does not recommend

product use for activities employing harsh and active chemicals. Please consult factory regarding

unusual applications.

Edgewood, New York 11717-8380

HAND SINKS - MA

Y 2005

Installation Instructions for

WALL MOUNTED

HAND WASHING SINK

Step 1:

Follow steps 1 and 2 from preceding pages.

Step 2:

Position Hand Sink onto Wall Mounting Clip. Mark top of Keyhole

Slot at Flange (Rear or Bottom) of hand sink. Open door to towel

dispenser - mark top of Keyhole Slot. Remove Hand Sink from

Wall Mounting Clip & drill holes for securing.

Step 3:

Follow steps 4 and 5 of preceding page.

TOWEL DISPENSER UNITS

PAGE 1
TOWEL DISPENSER UNITS Step 1: Follow steps 1 and 2 from preceding pages. Step 2: Position Hand Sink onto Wall Mounting Clip. Mark top of Keyhole Slot at Flange (Rear or Bottom) of hand sink. Open door to towel dispenser - mark top of Keyhole Slot. Remove Hand Sink from Wall Mounting Clip & drill holes for securing. Installation Instructions for WALL MOUNTED HAND WASHING SINK Step 3: Follow steps 4 and 5 of preceding page.
PAGE 2
CONTENTS INCLUDE: Step 2: Install faucet and drain assembly to Hand Sink. • (1) Hand Sink • (1) Wall Mounting Clip Step 3: (Wall mounting hardware not included) • (1) Drain Assembly (As required by model) • (1) Faucet (As required by model) Position Hand Sink onto Wall Mounting Clip. Mark top of Key Hole Slot at Flange (Rear or Bottom) of Hand Sink and remove from Wall Mounting Clip. Drill holes for securing Keyhole Slot Flange to wall.