Ice Bins with 7 Circuit Cold Plate Spec Sheet

REF-W
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
For Orders & Customer Service:
Email: [e-mail] or Fax: [phone]
For Smart Fabrication™ Quotes:
Email: [e-mail] or Fax: [phone]
STAINLESS STEEL
Ice Bins w/ 7-Circuit Cold Plate
18” and 21” Wide Units
Item #: Qty #:
Model #:
Project #:
18” WIDE
Model #
Approx.
Weight
Approx.
Cu. Ft.
21” WIDE
Model #
Approx.
Weight
Approx.
Cu. Ft.
O.A.
Length
(A)
Dist. To
Drain
(B)
Ice Bin
Depth
(C)
O.A. Height
of Bin
(D)
O.A.
Leg Height
(E)
Ice Bin
Capacity
SLI-12-24-7
88 lbs. 7
CRI-12-24-7
93 lbs. 8 24” 12”
12”
DEEP
14” 14” 77 lbs.
SLI-12-30-7
92 lbs. 11
CRI-12-30-7
95 lbs. 11 30” 15” 14” 14” 98 lbs.
SLI-12-36-7
98 lbs. 13
CRI-12-36-7
102 lbs. 13 36” 18” 14” 14” 119 lbs.
SLI-12-42-7
105 lbs. 13
CRI-12-42-7
108 lbs. 13 42” 21” 14” 14” 140 lbs.
SLI-12-48-7
110 lbs. 14
CRI-12-48-7
119 lbs. 14 48” 24” 14” 14” 161 lbs.
SLI-16-24-7
96 lbs. 7
CRI-16-24-7
103 lbs. 8
24” 12”
16”
DEEP
18” 10” 100 lbs.
SLI-16-30-7
104 lbs. 12
CRI-16-30-7
115 lbs. 12
30” 15” 18” 10” 127 lbs.
SLI-16-36-7
112 lbs. 16
CRI-16-36-7
120 lbs. 17 36” 18” 18” 10” 155 lbs.
SLI Series
18” Wide Units
MATERIAL:
Ice Bin, Front Apron, Backsplash: 22 gauge, 300 stainless steel
Sides: 20 gauge, 430 stainless steel
Understructure: 22 gauge galvaneal front/back;
11 gauge electrogalvaneal leg channel
Legs: 1 5/8” O.D. 18 gauge, galvanized steel
with adjustable plastic bullet feet
Ice Bin Insulation: 2 lbs. density styrofoam
Cold Plate: Cast aluminum with 7 circuits (5 syrup
and 2 water lines) with 5/16” diameter stainless steel bump
and swedge ends.
MECHANICAL:
1/2” IPS drain.
OPTIONAL:
SU-10B - 10” stainless steel leg upgrade (for 16” deep ice bins)
SU-10C - 14” stainless steel leg upgrade (for 12” deep ice bins)
SU-13 - 10-circuit cold plate upgrade
SU-30 - Soda chase provision
SU-40 - Prep unit for installation of speed rail
SSC-12 - Sliding cover for 12” ice bin
SSC-24 - Sliding cover for 24” ice bin
SSC-30 - Sliding cover for 30” ice bin
SSC-36 - Sliding cover for 36” ice bin
SSC-42 - Sliding cover for 42” ice bin
SSC-48 - Sliding cover for 48” ice bin
CRI Series
21” Wide Units
FOR 2015
NEW
DESIGN
NOTE: Bottle Racks Must Be Removed For NSF
Compliance & For Use With Optional Cover.
FEATURES:
Insulated ice bins are 12” or 16” deep.
7-Circuit cold plate sealed into the bottom of ice bin.
4” backsplash.
Two removable injection molded 3-pack plastic bottle racks.
Galvanized legs with adjustable plastic bullet feet.
Adjustable galvanized side cross-bracing.
CRI Series has rear deck for extra storage.
Optional Sliding
Stainless Steel Cover Shown