Drop In Ice Bins Spec Sheet

REF-W
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
For Orders & Customer Service:
Email: [e-mail] or Fax: [phone]
For Smart Fabrication™ Quotes:
Email: [e-mail] or Fax: [phone]
FEATURES:
10” deep ice bin.
Optional 7-Circuit cold plate sealed into the bottom.
Rubber thermal breaker reduces condensation.
Includes stainless steel sliding cover.
MECHANICAL:
1” IPS drain (non-cold plate models)
1/2” IPS drain (cold plate models)
MATERIAL:
Ice Bin: 20 gauge, 300 stainless steel
Jacket: 20 gauge galvanized steel
Cover: 20 gauge stainless steel
Ice Bin Insulation: 2 lbs. density foam-in-place
Molding: Extruded black polyethylene thermal breaker marine edge
STAINLESS STEEL
Drop-In Ice Bins
Item #: Qty #:
Model #:
Project #:
Model #
Dimension
(L)
Dimension
(B)
Cut Out Size
W x L
Ice
Capacity
Approx.
Weight
Approx.
Cu. Ft.
D-12-IBL
12”
6”
15 1/4” x 9 5/8” 23 lbs. 22 lbs. 3
D-24-IBL
21” 10 1/2” 15 1/4” x 20 3/8” 50 lbs. 39 lbs. 5
D-30-IBL
27” 13 1/2” 15 1/4” x 26 3/8” 62 lbs. 62 lbs. 8
D-36-IBL
33” 16 1/2” 15 1/4” x 32 3/8” 75 lbs. 67 lbs. 9
D-24-IBL-7
21” 10 1/2” 15 1/4” x 20 3/8” 50 lbs. 84 lbs. 5
D-30-IBL-7
27” 13 1/2” 15 1/4” x 26 3/8” 62 lbs. 107 lbs. 8
D-36-IBL-7
33” 16 1/2” 15 1/4” x 32 3/8” 75 lbs. 113 lbs. 9
With 7-Circuit Cold Plate
D-24-IBL
Shown
Sliding Stainless Steel
Cover Included