Technical Specifications

FEATURES:
One piece seamless Deep Drawn sink bowl design.
All sink bowls have a large liberal radii with a minimum dimension of 2”
and are rectangular in design for increased capacity.
Self-Rim Design. Mounting clips provided and accomodate counters
up to 2" thick. (Quantity supplied varies based on drop in sink ordered).
Includes 4" O.C. K-52 faucet & basket drain.
CONSTRUCTION:
Unit fabricated from one sheet of stainless steel.
All bowls are Sound Deadened.
Units feature Advance Tabco’s Smart Finish™.
MECHANICAL:
Faucet supply is 1/2” IPS male thread.
Deck mounted faucet is furnished with aerator and 4” O.C.
MATERIAL:
20 gauge type 304 series stainless steel.
Faucets are brass-nickel plated.
Stainless Steel 1-1/2" IPS basket drain.
Item #: Qty #:
Model #:
Project #:
A-1
NEW YORK GEORGIA TEXAS NEVADA
Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: [e-mail]. For Smart Fabrication™ Quotes, Email To: [e-mail] or Fax To: 631-586-2933
STAINLESS STEEL
DROP-IN SINKS
One Compartment - FOR HAND SINK USE
DI-1-10
DI-1-35
DI-1-5SP
DI-1-10SP
K-52
K-55
K-58
K-62
K-28
Model # Qty
Deck Mounted 3 1/2" Gooseneck. 4" O.C.
Deck Mounted 8 1/2" Gooseneck. 4" O.C.
Deck Mounted Swing w/Spray. 8" O.C.*
Deck Mtd. X.H.D. 3 1/2" Gooseneck. 4" O.C.
Thick-Counter Mounting Clips for Countetops
over 7/8" and up to 2".
(Qty. supplied varies based on sink ordered)
Available Faucets & Accessories
DI-1-5
Sinks Includes Gooseneck Faucet & Drain
New 6”
Rear & Side
Splash
STANDARD MOUNTING CLIPS
Accomodates Countertops up to 2"
Replacement # K-28 (Per Sink)
*REQUIRES K-472 FAUCET HOLE REVISION
For Replacement Faucets & Upgrades, Drains & Accessories
visit our website at www.advancetabco.com
Standard Faucet conforms to NSF 61 Standard 9. An optional faucet
upgrade is required for compliance to AB 1953 Standards.
DI-1-25