3 Compartment Dishtable Spec Sheet

Item #: Qty #:
Model #:
Project #:
STAINLESS STEEL
DISHTABLE
WITH 3 COMPARTMENT SINK
P-8
FEATURES:
3 Compartment Sinks.
Tile edge for ease of installation.
One piece Deep Drawn sink bowls with large liberal 3” radius.
Sink bowls positioned to optimize maximum work surface area.
CONSTRUCTION:
All TIG welded.
16 Gauge Stainless Steel (14 Guage Upgrade Available).
Stainless Steel Legs and Cross Bracing.
Stainless Steel Bullet Feet.
Gussets welded to Stainless Steel Channels.
Welded areas blended to match adjacent surfaces
and to a satin finish.
MECHANICAL:
Faucet holes in splash punched on 8” centers.
(Faucet not included)
Waste drains are 1 1/2” IPS and are included.
NEW Tile Edge Design
NEW YORK GEORGIA TEXAS NEVADA
Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: [e-mail]. For Smart Fabrication™ Quotes, Email To: [e-mail] or Fax To: 631-586-2933
83”
95”
95”
107”
119”
16” x 20” x 12”
16” x 20” x 12”
20” x 20” x 12”
20” x 20” x 12”
20” x 20” x 12”
15”
27”
15”
27”
39”
200 lbs.
230 lbs.
250 lbs.
265 lbs.
400 lbs.
Bowl Drainboard
Model #
L Size Size Wt.
Model #
DTC-3-1620-84LorR*
DTC-3-1620-96LorR*
DTC-3-2020-96LorR*
DTC-3-2020-108LorR*
DTC-3-2020-120LorR*
DTA-SS-18
DTA-SS-24
DTA-69
DTA-62
DTA-65
DTA-63
18” Stainless Steel Undershelf
24” Stainless Steel Undershelf
16” x 20” Prerinse Basket with
Welded Slide Bar
20” x 20” Prerinse Basket with
Welded Slide Bar
16” X 20” Prerinse Slide Bar
20” X 20” Prerinse Slide Bar
*Bowls are located 12” in from machine. For other configurations, contact factory.
Must verify machine for Control Box or Drive Unit Interference.
UPGRADE OPTION
For 14 Gauge Units, Add -14 at end of Model Number
*Bowls are located 12” in from machine.
For other configurations, contact factory.
Must verify machine for Control Box or
Drive Unit Interference.
Shown with optional
K-550 Rack storage
ACCESSORIES
Overhead Rack Shelves and Faucets Available.
Model #
DTA-56 per lin. ft.
Additional drainboard area
on machine side
MODIFICATIONS
10-1/2” EXTRA LARGE
Bold Looking Backsplash
with 2” return and tile edge
Deep Drawn Sinks
Seamless construction
for unsurpassed strength
and integrity.