Dish Machine Compatibility Chart

Dish Machine coMpatibility chart
The Following Dish Machines Require SMART FABRICATION
™
Modifications For Dishtable Compatibility.
Updated as of 3/1/2016
Continued From Page 2
3
For Any questions on compatibility and any other product,
please contact customer service at:
1-800-645-3166
or email us at:
[e-mail]
Noble
(Clark/Webstaurant)
I-E, HT-180, II NO MODIFICATION NEEDED.
II-CML, II-CMR Table exiting machine on front (L or R based on machine) must cut down backsplash to 3” tall. Add DTA-78.
44, 66 No obstructions (including channels) within 12” on either side of machine. Add DTA-76 to soil table if required.
Meiko
DV80.2, DV120.2, DV200.2 If dish machine is in corner, backsplash and front rolled rim on left side table must be notched to 2” tall and 5”
back to clear handle. Add DTA-78 twice to left table.
K-44, K-54, K-64, K-66, K-76, K-80, K-86,
K-90, K-100, K-200
Sink bowl must be 12” from dish machine. Add DTA-76 to soil dishtable.
CS70, DV80.2T, DV120.2T If dish machine is in a corner, the backsplash on the left side table must be notched to 5” tall to clear handle.
Add DTA-78 to left table. (Same as DV80.2 except front roll does not need to be modified.)
Moyer Diebel
MH-60, MH-65 If dish machine is in corner, backsplash must be notched to 4” tall to clear handle. Add DTA-78 to left table. Add
a second DTA-78 for left table to cut down front roll edge to 2”. If dish machine is in corner and sink is on left
dishtable, sink must be 16” from machine. Add DTA-76 to left soil dishtable.
- MACHINES ARE DISCONTINUED.
MD-44, MD-66, MD-2000 NO MODIFICATION NEEDED.
MD-1000 NO MODIFICATION NEEDED. - MACHINE IS DISCONTINUED.
Puritan
PA-44 Left side sinks bowls must be 12” from dish machine. Right side must be 12” from machine. Add DTA-76 to soil
PA-1, PA-2, PA-HT NO MODIFICATION NEEDED.
Stero
SDRA, SD-2RA If dish machine is in corner, add 2 DTA-56 and 1 K-508A to left side table to provide manufacturer -
recommended rear enclosure panel. If rear enclosure panel not desired, standard dish tables will fit with no
modification. Right side sink bowls must be 12” from dish machine (26” if using SDRA-PKG). Add DTA-76 if sink
is on right table.
SCT44, SCT66 Right side sinks bowls must be 12” from dish machine. Add DTA-76 if sink is on right table.
ER-44, ER-44-10, ER-66S, ER-76S, ER-
76SC
Clean side turn down requires 1/2” x 3” notch (included in K-508A price). No obstructions on clean side within
10” of machine. For ER-76SC only, no obstruction on soil side within 14” of machine (DTA-76 required).
SC-20-1A, SC-25-1M, SC-25-3M NO MODIFICATION NEEDED.
SC-1, SC-2, SC-3, SC-4, SC-5, SC-6,
SC-7, SC-8, SC-9
Soil side requires 2.25” extension of machine lip into dish machine. Add K-508A. Clean side requires notch in
machine lip and no obstructions including support channels within 12” of machine. Add K-508A.
Vulcan-Hart
3D20TF, 3D2FCD Right side sink bowls must be 16” from dish machine. Add DTA-76 if sink is on right side.
- MACHINES ARE DISCONTINUED.