Installation Instructions for Wire Shelving

Installation Instructions for

WIRE SHELVING

CHECK FOR CONCEALED DAMAGE

FILE CLAIM WITH DELIVERING FREIGHT CARRIER

ADVANCE TABCO Wire Shelving is recommended for practical storage

applications. ADVANCE TABCO does not recommend product use for

activities employing harsh and active chemicals. Please consult factory

regarding unusual applications.

Edgewood, New York 11717-8380

WS7-98

For Add-On Units

Step 5:

Following steps 1 and 2, assemble

add-on shelving using only two posts.

Step 6:

Two S-hooks included per shelf. Place

hooks over shelf edge of free-standing

unit and lower adjoining shelf edge of

add-on unit onto hooks. Repeat with

remaining shelves.

For Units With Casters

Step 7:

Following steps 1 and 2, assemble shelving and turn upside down.

Step 8:

Slip rubber wheel bumpers over the bottom of each post, push swivel stem

casters into bottom of each post. Seat securely.

PAGE 1
For Add-On Units Step 5: Following steps 1 and 2, assemble add-on shelving using only two posts. Step 6: Two S-hooks included per shelf. Place hooks over shelf edge of free-standing unit and lower adjoining shelf edge of add-on unit onto hooks. Repeat with remaining shelves. Installation Instructions for WIRE SHELVING For Units With Casters Step 7: Following steps 1 and 2, assemble shelving and turn upside down.
PAGE 2
Installation Requirements Step 3: Slide remainder of shelving onto posts. Place plastic tapered split sleeves on numbered posts at desired position. Push shelving down onto plastic sleeves until tight. (If necessary, tap lightly with rubber mallet.) (Illustration 3) Contents: (2) or (4) Chrome plated/epoxy coated wire shelves as per items in box.