Fabricated Sinks Spec Sheet

www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
For Orders & Customer Service:
Email: [e-mail] or Fax: [phone]
For Smart Fabrication™ Quotes:
Email: [e-mail] or Fax: [phone]
STAINLESS STEEL
FABRICATED ECONOMY SINKS
One & Two Compartments
E-4
MODEL #
Length Width Bowl Size Drbd. Length # of Drbrd.
Wt
L W A & B C Drbrds. Location
FC-1-1620 21” 26” N/A 0 None 50 lbs.
FC-1-1620-18RorL 36 1/2” 26” 18” 1 Specify 65 lbs.
FC-1-1620-18RL 52” 26” 18” 2 R & L 80 lbs.
FC-1-1818 23” 24” N/A 0 None 60 lbs.
FC-1-1818-18RorL 38 1/2” 24” 18” 1 Specify 65 lbs.
FC-1-1818-24RorL 44 1/2” 24” 24” 1 Specify 70 lbs.
FC-1-1818-18RL 54” 24” 18” 2 R & L 90 lbs.
FC-1-1818-24RL 66” 24” 24” 2 R & L 100 lbs.
FC-1-1824 23” 30” N/A 0 None 67 lbs.
FC-1-1824-18RorL 38 1/2” 30” 18” 1 Specify 105 lbs.
FC-1-1824-24RorL 45” 30” 24” 1 Specify 115 lbs.
FC-1-1824-18RL 54” 30” 18” 2 R & L 120 lbs.
FC-1-1824-24RL 66” 30” 24” 2 R & L 130 lbs.
FC-1-2424 29” 30” N/A 0 None 90 lbs.
FC-1-2424-18RorL 45” 30” 18” 1 Specify 118 lbs.
FC-1-2424-24RorL 50 1/2” 30” 24” 1 Specify 123 lbs.
FC-1-2424-18RL 60” 30” 18” 2 R & L 135 lbs.
FC-1-2424-24RL 72” 30” 24” 2 R & L 145 lbs.
FC-2-1515 35” 21” N/A 0 None 78 lbs.
FC-2-1620 37” 26” N/A 0 None 85 lbs.
FC-2-1620-18RorL 52 1/2” 26” 18” 1 Specify 100 lbs.
FC-2-1620-18RL 68” 26” 18” 2 R & L 118
lbs.
FC-2-1818 41” 24” N/A 0 None 83 lbs.
FC-2-1818-18RorL 56 1/2” 24” 18” 1 Specify 90 lbs.
FC-2-1818-18RL 72” 24” 18” 2 R & L 105 lbs.
FC-2-1818-24RL 84” 24” 24” 2 R & L 115 lbs.
FC-2-1824 41” 30” N/A 0 None 115 lbs.
FC-2-1824-18RorL 56 1/2” 30” 18” 1 Specify 130 lbs.
FC-2-1824-24RorL 62 1/2” 30” 24” 1 Specify 140 lbs.
FC-2-1824-18RL 72” 30” 18” 2 R & L 145 lbs.
FC-2-1824-24RL 84” 30” 24” 2 R & L 160 lbs.
FC-2-2424 53” 30” N/A 0 None 138 lbs.
FC-2-2424-18RorL 68 1/2” 30” 18” 1 Specify 155 lbs.
FC-2-2424-18RL 84” 30” 18” 2 R & L 210 lbs.
FC-2-2424-24RorL 74 1/2” 30” 24” 1 Specify 195 lbs.
FC-2-2424-24RL 96” 30” 24” 2 R & L 225 lbs.
TWO COMPARTMENTS
ONE COMPARTMENT
18”x18”
16”x20”
18”x18”
24”x24”
15”x15”
16”x20”
18”x24”
18”x24”
24”x24”
MATERIAL:
1 5/8” diameter stainless steel legs with
1” adjustable stainless steel bullet feet.
Entire unit is 16 gauge 304 stainless steel.
Gussets - stainless steel.
MECHANICAL:
• Supply is 1/2” IPS hot & cold.
• Faucet holes on 8” centers.
• Faucets are not included
(see accessories).
•
Waste drains are 1 1/2” IPS S/S basket
type, located in center of sink bowl, and are
included.
FEATURES:
Backsplash has tile edge for ease
of installation.
Sink bowls are 3/4” coved corner and meet
NSF requirements.
Rolled Rim Edge for additional strength.
Sink Bowls are 14” deep for greater capacity.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent
surfaces and to a satin fi nish.
Gussets welded to a die-formed
reinforced plate.
Fabricated Bowls are
Welded Together at the
Seams
K-700
Removable
Side Splashes
Fits Left OR Right
Side
Rolled Rim Edge
For Additional Strength
Item #: Qty #:
Model #:
Project #: