Fabricated Sinks Spec Sheet

www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
For Orders & Customer Service:
Email: [e-mail] or Fax: [phone]
For Smart Fabrication™ Quotes:
Email: [e-mail] or Fax: [phone]
MODEL #
Length Width Bowl Size Drbd. Length # of Drbrd.
Wt
L W A & B C Drbrds. Location
FC-3-1515 50” 20 1/2” N/A 0 None 110 lbs.
FC-3-1515-15RorL 62 1/2” 20 1/2” 15” 1 Specify 120 lbs.
FC-3-1515-15RL 75” 20 1/2” 15” 2 R & L 120 lbs.
FC-3-1620 53” 26” N/A 0 None 120 lbs.
FC-3-1620-18RorL 68 1/2” 26” 18” 1 Specify 135 lbs.
FC-3-1620-18RL 84” 26” 18” 2 R & L 150 lbs.
FC-3-1620-24RL 96” 26” 24” 2 R & L 205 lbs.
FC-3-1620-36RL 120” 26” 36” 2 R & L 240 lbs.
FC-3-1818 59” 24” N/A 0 None 120 lbs.
FC-3-1818-18RorL 74 1/2” 24” 18” 1 Specify 128 lbs.
FC-3-1818-24RorL 80 1/2” 24” 24” 1 Specify 136 lbs.
FC-3-1818-18RL 90” 24” 18” 2 R & L 140 lbs.
FC-3-1818-24RL 102” 24” 24” 2 R & L 150 lbs.
FC-3-1824 59” 30” N/A 0 None 135 lbs.
FC-3-1824-18RorL 74 1/2” 30” 18” 1 Specify 142 lbs.
FC-3-1824-24RorL 80 1/2” 30” 24” 1 Specify 150 lbs.
FC-3-1824-18RL 90” 30” 18” 2 R & L 265 lbs.
FC-3-1824-24RL 102” 30” 24” 2 R & L 300 lbs.
FC-3-2030-20RL 100” 36” 20” 2 R & L 315 lbs.
FC-3-2030-24RL 108” 36” 24” 2 R & L 355 lbs.
FC-3-2030-30RL 120” 36” 30” 2 R & L 370 lbs.
†
FC-3-2424 77” 30” N/A 0 None 175 lbs.
†
FC-3-2424-18RorL 92.5 30” 18” 1 Specify 310 lbs.
†
FC-3-2424-18RL 108” 30” 18” 2 R&L 330 lbs.
†
FC-3-2424-24RorL 98 1/2” 30” 24” 1 Specify 330 lbs.
†
FC-3-2424-24RL 120” 30” 24” 2 R & L 350 lbs.
†
FC-4-1818-18RL 108” 24” 18”x18” 18” 2 R & L 270 lbs.
†
FC-4-1824-18RL 108” 30” 18”x24” 18” 2 R & L 325 lbs.
†
FC-4-2424-24RL 144” 30” 24”x24” 24” 2 R & L 355 lbs.
STAINLESS STEEL
FABRICATED ECONOMY SINKS
Three & Four Compartments
REF-E
†
Requires Two Sets of Faucets
15”x15”
16”x20”
24”x24”
20”x30”
18”x18”
18”x24”
FEATURES:
Backsplash has tile edge for ease
of installation.
Sink bowls are 3/4” coved corner and meet
NSF requirements.
Rolled Rim Edge for additional strength.
Sink Bowls are 14” deep for greater capacity.
CONSTRUCTION:
All TIG welded.
Welded areas blended to match adjacent
surfaces and to a satin finish.
Gussets welded to a die-formed
reinforced plate.
MATERIAL:
1 5/8” diameter stainless steel legs with
1” adjustable stainless steel bullet feet.
Entire unit is 16 gauge 304 stainless steel.
Gussets - stainless steel.
MECHANICAL:
• Supply is 1/2” IPS hot & cold.
• Faucet holes on 8” centers.
• Faucets are not included
(see accessories).
•
Waste drains are 1 1/2” IPS S/S basket
type, located in center of sink bowl, and
are included.
4 COMP.
3 COMPARTMENT
Fabricated Bowls are
Welded Together at the
Seams
K-700
Removable
Side Splashes
Fits Left OR Right
Side
Rolled Rim
Edge For
Additional
Strength
Item #: Qty #:
Model #:
Project #: