Technical Specifications

NEW YORK GEORGIA TEXAS NEVADA
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
Item #: Qty #:
Model #:
Project #:
KMS-11B-305L
KMS-11B-305R
KMS-11B-306L
KMS-11B-306R
Choose Left or Right Sink Position
Model # Length
Weight
30”X60”
30”X60”
30”X72”
30”X72”
140 lbs.
140 lbs.
165 lbs.
165 lbs.
STAINLESS STEEL
TABLE WITH SINK
O-5
FEATURES:
Top is furnished with 1 5/8” sanitary rolled rim edge on front and
square sides, and a 5” splash with a 1” return on the rear side.
THREE hat channels stud welded to reinforce and maintain a level
working surface.
Pre-engineered welded angle adapters insure ease of future
drawer installation.
Aluminum die cast “leg-to-shelf clamp secures shelf to leg
eliminating unsightly nuts and bolts. Undershelf is adjustable.
Stainless steel 16” x 20” x 12” sink integrally welded to top.
K-50 Deck Mounted Faucet included.
CONSTRUCTION:
All TIG welded. Exposed weld areas polished to match
adjacent surfaces.
Entire top mechanically polished to a satin finish.
Top is sound deadened.
Roll formed embossed galvanized hat channels are secured to
top by means of structural adhesive and weld studs.
Gussets welded to support hat channels.
MATERIAL:
TOP is 16 gauge stainless steel type “304” series.
SHELF is 18 gauge stainless steel type “430” series.
LEGS are 1 5/8” diameter, tubular stainless steel with
stainless steel gussets and 1” adjustable stainless steel bullet feet.
Featuring as Standard:
“THE PROVEN”
ORIGINAL ADVANCE TABCO
Adjustable Undershelf
with Die Cast Leg Clamp
Bullet Feet
NEW
Rolled Rim Edge on
Front & Square
Edges on Side & Back
KMS-11B-305R Shown

Summary of content (2 pages)