Aluminum Keg Racks Spec Sheet

ALUMINUM
KEG RACKS
FEATURES:
20” Wide fully adjustable shelves.
(2) Keg storage shelves with 1-3/4” square tubing
welded front to back.
Top shelf with 1-3/4” square tubing welded left to right.
Top Shelf Load Rating - 15 lbs. sq. ft. evenly
distributed.
Keg Shelves Load Rating - 60 lb. per sq. ft. evenly
distributed load.
CONSTRUCTION:
Shelves: Fully welded 1-3/4” square tubing.
Upright Posts: 1-5/16” aluminum post
with 4 plastic caps.
MATERIAL:
Extruded Aluminum Tubing & Support Pieces.
FEATURES:
Prevents kegs from sliding off rear of a keg rack shelf.
CONSTRUCTION:
Fully welded 1-3/4” square tubing.
MATERIAL:
Extruded Aluminum Tubing & Support Pieces.
R-14
KR-42
KR-60
KR-72
KR-80
KR-93
MODEL #
Overall Size
# of Kegs
Wt.
L x W x H
Per Unit
50 lbs.
68 lbs.
80 lbs.
88 lbs.
100 lbs.
4
6
8
8
10
NOTE: Top shelf not recommended for Keg Storage.
KR-1 recommended to minimize falling kegs.
(See below)
42” x 20” x 76”
60” x 20” x 76”
72” x 20” x 76”
80” x 20” x 76”
93” x 20” x 76”
Model #
Qty
Accessory
Rear Strap - 42” KR-1-42
Rear Strap - 60” KR-1-60
Rear Strap - 72” KR-1-72
Rear Strap - 80” KR-1-80
Rear Strap - 93” KR-1-93
Item #: Qty #:
Model #:
Project #:
OPTIONAL REAR KEG STRAP
MODEL # KR-1 SERIES
NEW YORK GEORGIA TEXAS NEVADA
Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: [e-mail]. For Smart Fabrication™ Quotes, Email To: [e-mail] or Fax To: 631-586-2933