Work Table with Mid Mount Pot Rack and Overshelf Spec Sheets

www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
For Orders & Customer Service:
Email: [e-mail] or Fax: [phone]
For Smart Fabrication™ Quotes:
Email: [e-mail] or Fax: [phone]
STAINLESS STEEL
WORK TABLE
with Mid-Mount Pot Rack & Overshelf
REF-O
Item #: Qty #:
Model #:
Project #:
FEATURES:
Includes adjustable utensil rack and pot rack, with 18 hooks.
12” wide adjustable stainless steel shelf mounted in the middle of table
top, with supports at both ends of the table, maximizing work area.
Top is furnished with 1-5/8” sanitary rolled rim edges on front
& back and square side edges.
To reinforce and maintain a level working surface, tables are supplied
with THREE hat channels.
Aluminum die cast “leg-to-shelf” clamp secures shelf to leg
eliminating unsightly nuts & bolts. Stainless steel undershelf is adjustable.
Stainless steel legs and bullet feet.
CONSTRUCTION:
All TIG welded. Exposed weld areas polished to match adjacent surfaces.
Entire top mechanically polished to a satin finish.
Top is sound deadened.
Roll formed embossed galvanized hat channels are secured to top by
means of structural adhesive and weld studs.
Gussets welded to support hat sections
MATERIAL:
OVERSHELF: 18 gauge, 430 stainless steel
POT RACK: 1/4” x 2” stainless steel bar
UTENSIL RACK: 1/4” x 2” stainless steel bar
TOP: 16 gauge, 304 stainless steel
UNDERSHELF: 18 gauge stainless steel
LEGS: 1 5/8” diameter tubular stainless steel with 1” adjustable stainless
steel bullet feet. Stainless steel gussets.
Model #
Size
W x L
Approx.
Weight
Approx.
Cu. Ft.
MS-305-PRSC-X
30” x 60” 185 lbs. 14
MS-306-PRSC-X
30” x 72” 205 lbs. 16
Featuring as Standard:
“THE PROVEN” ORIGINAL ADVANCE TABCO
Adjustable Undershelf with Die Cast Leg Clamp
Rolled Rim Edges On Front & Back
and Square Side Edges