Installation Instructions for Budget Sink No Splash Drainboards

18”-24” and 30” No-Splash Drainboards
Contents:
(1) No-Splash Drainboard
(2) Drainboard Support Braces or (2) Galvanized Legs with
Adjustable Plastic Bullet Feet (36” & 48” Units only)
(1) Angle Bracket
(2) 5/16” - 24 x 1/2” Socket Set Screws
(2) 1/4” - 20 x 3/8” Slotted Truss Screws
(2) 1/4” - 20 Hex Nuts
(2) 5/16” - 24 Hex Nuts
(3) 10 -24 Nyloc Hex Nuts
Tools Required:
7/16” Open End Wrench
3/8” Open End Wrench
1/2” Open End Wrench
Step 1:
Remove 2 Set Screws from gussets on desired side of sink which No-
Splash Drainboard is to be attached (Illustration 1). Install longer 1/2” Set
Screws & tighten (Illustration 2).
Step 3:
A) Position No-Splash
Drainboard onto Budget Sink
(Illustration 3a).
Step 2:
Install Support Braces (2) to
No-Splash Drainboard using
1/4” - 20 x 3/8” screws and nuts
provided (Illustration 3).
NOTE: Longer flange attaches
to drainboard.
Illustration 1
Illustration 2
Illustration 3
Illustration 3a
Illustration 3b
Illustration 3c
B) Align hole at bottom of
Support Brace with 1/2”
Set Screw(Illustration 3b).
C) Attach 5/16” - 24 Hex Nut and tighten (Illustration 3c).
Flat Head Screw Driver
5/32” Allen Wrench