Installation Instructions for SHD Series Drawers

7
TA-97SHD Poly Storage Bracket
For SHD Series Drawers
(Poly Board TA-41SHD Not Included)
Step 1:
Remove Stainless Steel Drawer Pan and Inner Chassis
(See Figure 1).
Figure 10
Figure 11
Step 2:
Position Poly Storage Bracket such
that the opening faces the front of
the Drawer. Align the (2) holes at the
top of the TA-97SHD with the holes
in the bottom Flange of the existing
SHD Drawer (See Figure 10).
Step 3:
Align Optional Poly Board and slide into Poly Storage Bracket.
Step 3:
Install Bolt into the holes such that
the Bolt Head seats against the
inside Flange of the TA-97SHD. Se-
cure with Nuts provided
(Figure 11).
Contents:
(2) Poly Storage Brackets
(4) 1/4 - 20 x 1/2” Bolts with Nuts
Tools Required:
(2) 7/16” Open End Wrenches