Equipment Filler Table with Open Base Spec Sheet

Item #: Qty #:
Model #:
Project #:
STAINLESS STEEL
EQUIPMENT FILLER TABLE
FEATURES:
TOP is furnished with 1 5/8” sanitary rolled rim edge in front. Square
edges on sides and 1/1/2” splash of single metal thickness on rear.
Hat channels stud welded to top which reinforces and
maintains a level working surface.
Welded Front to Back Leg Assembly.
Rear (Left to Right) Stretcher bolts to side leg assemblies.
Aluminum die cast “leg-to-shelf” clamp secures shelf to leg
eliminating unsightly nuts and bolts. Undershelf is fully adjustable.
CONSTRUCTION:
All TIG welded. Exposed weld areas polished to match
adjacent surfaces.
Entire top mechanically polished to a satin finish.
Top is sound deadened.
Roll formed embossed galvanized hat channels are secured to top by
means of structural adhesive and weld studs.
Gussets welded to support hat sections.
MATERIAL:
TOP: 16 gauge stainless steel type “304” series.
SHELF: 16 gauge stainless steel type “304” series.
STRETCHERS: 1 5/8” diameter tubular stainless steel.
LEGS: 1 5/8” diameter tubular stainless steel.
Stainless steel gussets.
1” stainless steel bullet feet.
TFMS-182
TFMS-180
TFMS-183
TFMS-152
TFMS-150
TFMS-153
TFMS-122
TFMS-120
TFMS-123
Model # Width Length Wt.
18”
18”
18”
15"
15"
15"
12"
12"
12"
24”
30”
36"
24"
30"
36"
24"
30"
36"
35 lbs.
38 lbs.
51 lbs.
25 lbs.
33 lbs.
41 lbs.
22 lbs.
30 lbs.
39 lbs.
TFMSU-182
TFMSU-180
TFMSU-152
TFMSU-150
Model # Width Length Wt.
18”
18”
15"
15"
24”
30”
24"
30"
38 lbs.
41 lbs.
28 lbs.
36 lbs.
TFMS Series
w/ Open Base
TFMSU Series
w/ Adjustable Undershelf
OPEN BASE ADJUSTABLE UNDERSHELF
NEW YORK GEORGIA TEXAS NEVADA
Fax: [phone] Fax: [phone] Fax: [phone] Fax: [phone]
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: [e-mail]. For Smart Fabrication™ Quotes, Email To: [e-mail] or Fax To: 631-586-2933
O-17