PRODUCT STANDARDS AND USE INFORMATION • Sink Bowl Standards • • • • • Drain Flows Grease Trap Sizing NSF Requirements For Sinks Stainless Steel Cleaning Work Table Load Capacities
SINK BOWL STANDARDS STANDARDS STANDARDS One Gallon of Water One Gallon of Water One Cubic Foot One Cubic Foot Of Water = 8.34 lbs. = 231 Cubic Inches = 7.49 Gallons = 62.43 CAPACITY - Deep Drawn Bowls BOWL SIZE 10" x 14" x 5" 10" x 14" x 10" 14" x 16" x 10" 14" x 16" x 12" 16" x 20" x 12" 16" x 20" x 14" Capacity In Gallons Per Compartment 2.75 5.50 9.35 11.25 15.70 18.
CORROSION AS IT APPLIES TO EQUIPMENT MANUFACTURED BY ADVANCE TABCO WHEREAS... 1. Corrosion is rust. 2. 430 and 304 Stainless Steel is an acceptable material for food service application. PROVIDED... 1. A normal maintenance program must be in place. 2. Normal use must be part of the criteria. 3. Normal exposure to the environment. HOWEVER, be aware of the following... 1. Well Water (Heavy Sediment). 2. Salt Air (Coastal Conditions). 3. High Humidity (Southern Locations). 4.
TABLE TOP LOAD CAPACITY Length Width Table Top FORMULA: To Calculate Uniformly Distributed Load Capacity For 14 Gauge Stainless Steel Worktables: Square Feet (Length x Width) x Load LOAD CAPACITY FOR 14 GAUGE TABLE TOPS LOAD (LBS. PER SQ. FT.) TABLE TOP WIDTH 24" (2') 30" (2.5') 36" (3') TABLE TOP LENGTH 3' 3'-4' 4'-5' 5'-6' 8'-10' 10'-12' 65 50 45 35 25 20 To Calculate Load Capacity for 16 Gauge Work Tables, Use the above 14 GAUGE formula, and then multiply 80% (.
