Manualshelf

Installation Instructions for TT Series Work Tables

ManualsBrandsAdvance Tabco ManualsCommercial EquipmentTTF-306-X Lite Series Work Table with Galvanized Steel Undershelf and Legs, Backsplash and Plastic Bullet Feet, 30" x 72"
12
TABLES with Undershelf
This package contains Table Top, Undershelf, Legs & Set Screws
Step 1:
Lay the table top flat on
the box to protect the
finish during assembly.
(Figure 1)
Figure 1
Step 3:
Insert legs and undershelf
assembly into gussets of
the table top as indicated in
Figure 3. Tighten set screws.
NSF Installations require all set screws filled
with an approved silicone sealer.
Set Screw
Adjustable Bullet Feet
Figure 2
Figure 3
Leg Collar
Step 2:
Insert set screws into undershelf leg collar. Position leg into leg col-
lar to desired height and tighten set screw to secure legs
INSTALLATION OF ADVANCE TABCO DRAWERS:
if you are installing Advance Tabco Drawers, you will need to order
a TA-90 Drawer Adapter. This will allow the drawers to attach to a
TT Series Table.
Please see the Drawer Instruction Guide for
Installation on the Advance Tabco
website: http://www.advancetabco.com.
FINAL STEP
Turn table upright and level by adjusting bullet feet.
NSF Installations require all set screws filled
with an approved silicone sealer.
Leg Collar