Technical Specifications

Item #: Qty #:
Model #:
Project #:
STAINLESS STEEL & ALUMINUM
WALL SHELVES
L-5
NEW YORK GEORGIA TEXAS NEVADA
Fax: (631) 242-6900 Fax: (770) 775-5625 Fax: (972) 932-4795 Fax: (775) 972-1578
www.advancetabco.com
Customer Service Available To Assist You 1-800-645-3166 8:30 am - 8:00 pm E.S.T.
Email Orders To: customer@advancetabco.com. For Smart Fabrication™ Quotes, Email To: smartfab@advancetabco.com or Fax To: 631-586-2933
KD Wall Shelf
Standard Wall Shelf
WS-10-24
WS-10-36
WS-10-48
WS-10-60
WS-10-72
WS-10-84
WS-10-96
WS-10-108
WS-10-120
WS-10-132
WS-10-144
WS-12-24
WS-12-36
WS-12-48
WS-12-60
WS-12-72
WS-12-84
WS-12-96
WS-12-108
WS-12-120
WS-12-132
WS-12-144
WS-15-24
WS-15-36
WS-15-48
WS-15-60
WS-15-72
WS-15-84
WS-15-96
WS-15-108
WS-15-120
WS-15-132
WS-15-144
10”
Qty
12”
Qty
15”
Qty
18”
Qty
Wide Wide Wide Wide
WS-18-24
WS-18-36
WS-18-48
WS-18-60
WS-18-72
WS-18-84
WS-18-96
WS-18-108
WS-18-120
WS-18-132
WS-18-144
Furnished with a 1 1/2” sanitary rolled rim with a
1-1/2” turn-up edge at rear. Ends are turned down square.
18 gauge type “430” stainless steel.
Secured to wall by means of bolts through support brackets.
Brackets can be positioned to accomodate wall studs.
Units 7 ft. and larger are furnished with 3 brackets.
RReeqquuiirreemmeennttss ffoorr NNSSFF IInnssttaallllaattiioonnss
11..
I
nstall at least 60” above floor.
22..
Limit to dry storage.
33..
Avoid contact with liquids.
44..
For “Ganging-Up” installation, allow at least 2” between units or
mount units side by side and seal joints with an approved sealant.
FEATURES:
Furnished with a 1 1/2” sanitary rolled rim with a
1-1/4” turn-up edge on sides and rear.
Unit is easily assembled employing the slip-fit TAB-LOK design.
CONSTRUCTION:
Shelf and brackets are die stamped and die formed.
MATERIAL:
WS-KD Series - 18 gauge stainless steel polished to a satin finish.
AWS-KD Series - Heavy gauge aluminum.
WS-KD-24
WS-KD-36
WS-KD-48
WS-KD-60
AWS-KD-24
AWS-KD-36
AWS-KD-48
AWS-KD-60
S/S ALUMINUM length
24”
36”
48”
60”
10”
12”
15”
18”
Width A
8”
10”
10”
10”
Length = 24” to 144” in 12” increments.
ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. © ADVANCE TABCO, DEC. 2005
USE TA-49
For Wall Shelf
Offset
Length
Width
2"
11/2
"
A
3
"
2
"
2"
WALL

Summary of content (1 pages)