User's Manual

Project
DATE
22/06/20
TCU-FITAX-3.5
FCC Certification
REFERENCE
LEVEL
V01.04
SHEET
24/45
Link to TOP INDEX
BY
MVT
Version:
V01.00
V01.01
V01.02
V01.03
V01.04
Author:
MVT
MVT
MVT
MVT
MVT
Date:
23/03/20
11/05/20
20/05/20
22/05/20
22/06/20
FICOSA INTERNATIONAL S.A. 2016. This document or its contents may not be communicated
or distributed to third parties or reproduced in whole or in part without the express permission of FICOSA
Figure 23. FCW Use Case #4
FCW Use Case 4: When the remote vehicle is obstructed by another remote vehicle
that is stopped in the same lane, then host vehicle receives a warning from the FCW.
7.3 Blind Spot Warning/Lane Change Warning (BSW/LCW)
The BSW/LCW safety application warns the driver of the HV during a lane change
attempt if the blind-spot zone into which the HV intends to move is, or will soon be,
occupied by another vehicle travelling in the same direction. Moreover, the application
may also provide advisory information that is intended to inform the driver of the HV
that a vehicle in an adjacent lane is positioned in a blind-spot zone of the HV when a
lane change is not being attempted.
Figure 24. BSW/LCW Use Case #1
BSW/LCW Use Case 1: When remote vehicle is in the blind-spot zone and host
vehicle detects the driver’s intent to change lanes, then the host vehicle receives an
advisory warning from the BSW/LCW.