User's Manual

Project
DATE
22/06/20
TCU-FITAX-3.5
FCC Certification
REFERENCE
LEVEL
V01.04
SHEET
36/45
Link to TOP INDEX
BY
MVT
Version:
V01.00
V01.01
V01.02
V01.03
V01.04
Author:
MVT
MVT
MVT
MVT
MVT
Date:
23/03/20
11/05/20
20/05/20
22/05/20
22/06/20
FICOSA INTERNATIONAL S.A. 2016. This document or its contents may not be communicated
or distributed to third parties or reproduced in whole or in part without the express permission of FICOSA
Wi-Fi – 2.4GHz/Bluetooth
Wi-Fi/BT Flexible
Antenna
(Manufacturer: Ficosa
S.L)
2.3 dBi
Wi-Fi – 5GHz
4 dBi
*Maximum Gain Data for GSM, WCDMA and LTE is taken from Quectel LTE Module
SC20 supplier Datasheet, the FCC IF of which is XMR201706SC20A.
Additional Notes:
 The DUT needs external antennas to be properly used and are not included in the
scope of this certification. For test purposes, a representative antenna model has
been used with 7dBi Gain on the 802.11p frequency range and 5dBi on the GNSS
frequency ranges.
 If the device operates in the specified bands, an Antenna with maximum gain of
3dBi must be used.
 The device has two operative DSRC channels which can not operate
simultaneously in normal mode of operation.
10.2 RF exposure safety
This device complies with the FCC RF exposure limits and has been evaluated in
compliance with mobile exposure conditions.
The equipment must be installed and operated with minimum distance of 20 cm of the
human body.
10.3 FCC Statement
Note: This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to