User's Manual

ACR120S SDK User Manual version 2.2 April 2006

Advanced Card Systems Ltd.
C. Tools and Utilities
The following tools are included in the SDK CD-ROM:
C.1 ACR120 Tool
ACR120 Tool is an application utility that allows you to examine and manipulate contents inside a
contactless smart card. It can also be used for different ISO 14443 contactless smart cards available in the
market.
This utility supports two interface types of ACR120 readers, the ACR120S (Serial Interface) and ACR120U
(USB Interface).
Also, the utility does not support Windows NT.
Note:
In the Analyze Device command,
make sure the reader Mode is set
to Binary for the ACR120S Tool to
work properly.
For detailed explanation on how to
use the ACR120 Tool, please refer
to its Help file.
C.2 QuickView
This is a utility program that checks if you have properly installed your ACR3x readers. This tool works with
your ACR38DT DualKey only.
To use this tool, make sure you have properly installed and connected the ACR38DT to your PC. Check the
Driver Installation
Section on how to install device driver then plug your ACR38DT into an available USB
Port on your PC (see Connection Diagram
Section).
For detailed explanation on how to use this tool, you may check the Help menu on the program.
 Advanced Card Systems Ltd. Page 27 of 28
Tel: [phone] Fax: [phone]
Website: www.acs.com.hk Email: [e-mail]
Unit 1008, 10th Floor
Hongkong International Trade and Exhibition Centre
1 Trademart Drive, Kowloon Bay, Hong Kong