User's Manual

\
ACR122U NFC Reader
4. Create a DWORD entry (32-bit) with
the name:
EscapeCommandEnable
5. To Modify the value of the
EscapeCommandEnable, double click
on the entry and input 1 in the Value
data with the base set in Hexadecimal
Note: Repeat the above steps (including
the PCSC Enable Command for the
other ACR122 Devices connected in
other USB ports.
2.3 Installation of SDK Components
1. You can click on the Getting
Started Option to check the
procedure on how to install the
ACR122 SDK components.
Page 8 of 18
ACR122U NFC Reader SDK User Manual
Version 1.7 October 2008