User's Manual
ACR1281U
Advanced Card Systems Ltd. Page 49 of 81
Byte Address = A7A6A5A4 A3A2A1A0 b is the memory address location of the memory card.
= 1000 0000 b for writing fuse
MEM_L Length of data to be written to the memory card.
Byte x Data to be written to the memory card.
• Response data format
SW1 SW2
• SW1, SW2 = 90 00 if no error
4.4 Verify Password
• Command format
Pseudo-APDU
CLA INS P1 P2 Lc Data
FF
H
20
H
00
H
00
H
04
H
RP Pw(0) Pw(1)
Pw(2)
Pw(0),Pw(1),Pw(2) Passwords to be sent to memory card.
RP = 0000 rp2p1p0 b
where the four bits “rp2p1p0” indicate the password to compare:
r = 0: Write password,
r = 1: Read password,
p2p1p0: Password set number.
(rp2p1p0 = 0111 for the secure code).
• Response data format
SW1 SW2
ErrorCnt
90
H
• SW1 = 90
• SW2 (ErrorCnt) = Error Counter. FF indicates the verification is correct. 00 indicates the
password is locked (exceed maximum number of retries). Other values indicate the current
verification is failed.
4.5 Initialize Authentiction
• Command format
Pseudo-APDU
CLA INS P1 P2 Lc
Q(0) Q(1) … Q(7)
FF
H
84
H
00
H
00
H
08
H