User's Manual

ACR1281U
 Advanced Card Systems Ltd. Page 65 of 81
Note: After SW1SW2 = 0x9000 has been received, read back the Application Area can check
whether the VERIFY_MEMORY_CODE is correct. If all data in Application Area is erased and
equals to “FF”, the previous verification is success.
9. Memory Card – AT88SC101 / AT88SC102 / AT88SC1003
9.1 Select Card Type
This command powers down and up the selected card inserted in the card reader and performs a
card reset.
• Command format
Pseudo-APDU
CLA INS P1 P2 Lc Card Type
FF
H
A4
H
00
H
00
H
01
H
09
H
• Response data format
SW1 SW2
• SW1, SW2 = 90 00 if no error
9.2 Read Memory Card
• Command format
Pseudo-APDU
CLA INS P1 Byte
Address
MEM_L
FF
H
B0
H
00
H
Byte Address = Memory address location of the memory card.
MEM_L Length of data to be read from the memory card.
• Response data format
BYTE 1 … … BYTE N SW1 SW2
• BYTE x Data read from memory card
• SW1, SW2 = 90 00 if no error