ACR3901T-W ACR3901T-W Test Manual V1.00 Name Prepared by: Keith Mo Signature Date 2017-07-17 Reviewed by: Approved by: Subject to change without prior notice info@acs.com.hk www.acs.com.
1.0. USB Mode Loopback program This section introduces ACR3901T-W Reader using in USB Mode Tools Requirement: a. ACR3901T-W reader b. ACOS3 Card c. USB Cable d. PC & USB Mode loopback program “ESD4.exe” Test Procedure: 1. Insert the “ACOS3” test card into the ACR3901T-W reader. 2. Plug the ACR3901T-W reader into PC through USB cable 3. The Green LED is blinking and the reader is in USB mode. 4. Double-click “ESD4.exe” (TestProgram\USB_Mode) to start the testing application.
The test program needs “Visual Basic 6.0 run time files” on PC, if “ESD4.exe” cannot be opened, please install “vbrun60sp5.exe” first under the folder “TestProgram\USB_Mode\”. 5. Press “Initialize” button to search the smart card reader. ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
ACS ACR3901U ICC Reader 0” will display 6. Press “TEST” button to start testing. 7. The test program is running. ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
8. When the testing is finished, press “Quit” button to stop and end the program. 9. Unplug the reader. ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
2.0. Bluetooth Mode Loopback program This section introduces ACR3901T-W Reader using in Bluetooth Mode. (It can connect USB adapter to charge the battery inside the reader) Tools Requirement: a. ACR3901T-W reader b. ACOS3 Card c. Bluetooth 4.0 USB Adaptor Dongle d. PC & Bluetooth Mode loopback program “ACR3901U FCC Tool V2.00.exe” Test Procedure: 1. Plug in the Bluetooth Adaptor into PC (For the first time to use, please install the driver, please refer to Section 5.
5. “Device initialization successfully completed!” will be shown if success. 6. Insert the “ACOS3” test card into the ACR3901T-W reader. (Open the back casing and then insert the test card) 7. Press the button to turn on the reader and enter Bluetooth mode. The Blue LED is blinking and the reader is in pairing mode. (Do not plug-in the reader to PC by USB cable) ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
8. Press the “Scan” button to scan the Bluetooth device. 9. The corresponding reader information will be scanned as the following. 10. Select the ACR3901T-W reader (eg, ACR3901T-W-001001) and then press “Start” to connect the reader in Bluetooth mode. ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
11. The card testing program is started. 12. The reader is sending and receiving command as below window. The Blue LED is blinking very fast. ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
13. After finished the test, press “Stop” to stop the card testing. 14. Press “Disconnect” to disconnect the bluetooth connection of the reader. ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
15. Close the testing program. 16. “Holding” the button for around 5 seconds to turn off the reader. Or press the button at the back to reset the reader. ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
4.0. USB Mode Driver Installation 1. Connect the Reader and plug the USB cable into PC, if the PC could not install the driver “Microsoft Usbccid Smartcard Reader (WUDF)” automatically. User needs to unzip and use the driver under “TestProgram\USB_Mode\USBModeDriver\” 2. At Computer icon, right click on “Computer” select “Properties” 3. Select “Device Manager” 4.
5. Select “Browse my computer for driver software” ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
6. Press “Browse” and select the unziped USB Mode driver under the path: “\TestProgram\USB_Mode\USBModeDriver” 7. Press “Next”to install the driver. 8. The security window may popup and asks to confirm installation. Press “Install” ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
9. When the driver has finished installation, Press “Close” 10. In device manager, user could check the reader driver with name “ACR3901U ICC Reader” is ready. ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
5.0. Bluetooth Adaptor Driver Installation 1. Insert the Bluetooth Adaptor into PC, then the PC will automatically popup the driver software installation window, wait that the driver will not successfully installed, press “Close”. 2. Mouse move to Computer, right click on “Computer” select “Properties” 3. Select “Device Manager” ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
4. Check “Other devices”, use the mouse to right click “Unknown device”, Select “Update device software…” 5. Select “Browse my computer for driver software” ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
6. Press “Browse” and select the Bluetooth adaptor driver “ccxxxx_usb_cdc.inf”under the following path: \ACR3901T-W_TestProgram\BT_Mode\AdaptorDriver\ccxxxx_usb_cdc.inf 7. Press “Next”to install the driver. 8. It the windows security warning message shows as below,select “Install this driver software anyway”to continuous the installation. ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
9. Wait until the driver updates successfully, the message will shows which COM Port is assigned to the Bluetooth adaptor. As the example below, the assigned com port is COM8. Press “Close” to finish the installation. 10. After driver installation successfully finish, user can check the assigned com port again from “Device Manager” ACR3901T-W Test Manual Version 1.00 info@acs.com.hk www.acs.com.
FCC Caution Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.