User Manual

ZIR000 Instructions

P/D 092704

HomePro

by ADVANCED CONTROL TECHNOLOGIES, INC.

0685-01

Power Four (4) AAA batteries

Mounting Mounting bracket provided

Signal (Frequency) 908.42 MHz

Range Up to 100 feet line of sight between the Wireless Controller and /or the

Mounted Dimensions (H x W x D) 4.125” x 2.6” x 3.10” (10.47cm x 6.6cm x 7.8 cm) closest HomePro

Reciever Module

WARRANTY

For warranty and general product information visit our web site at www.act-solutions.com

ABOUT ZIR000’S CERTIFICATION

The ZIR000 has been thoroughly tested by the ETL SEMCO division

of Intertek, a nationally recognized testing laboratory. This product

was found to be in compliance with safety standards ANSI/

UL STD 244A and CAN/CSA C22.2 No. 177.

In addition to compliance with product safety standards, the ZIR000

is also certified to comply with applicable FCC and IC rules and

regulations governing RF and EMI emissions.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) This device must accept any interference received, including interference that may

cause undesired operation.

FCC NOTICE

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer-

ence to radio or television reception, which can be determined by turning the equipment off and on, the user is encour-

aged to try to correct the interference by one or more of the following measures:

- Increase the separation between the equipment and receiver.

- Consult the dealer or an experienced radio/TV technician for help.

IC NOTICE

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must

accept any interference, including interference that may cause undesired operation of the device.