TDS

ManualsBrandsAdvanced Drainage Systems ManualsPlumbing Product4 in. x 10 ft. Triplewall Pipe Solid

ADS, Inc. Drainage Handbook Specifications  1-25

ADS 3000 TRIPLEWALL

PIPE SPECIFICATION

Scope

This specification describes 4-inch (100 mm) ADS 3000 TripleWall pipe for use in gravity-flow drainage

and leach field applications.

Pipe Requirements

ADS 3000 TripleWall pipe shall have a smooth interior and exterior.

• 4-inch (100 mm) pipe shall meet the requirements of ASTM F810.

• Manning's "n" value for use in design shall not be less than 0.009.

Joint Performance

Pipe joints shall be bell-and-spigot. Bell ends shall be integrally formed on the pipe at one end to form a

soil-tight connection.

Material Properties

Pipe material shall be high-density polyethylene conforming with the minimum requirements of cell

classifications 424410C or E as defined and described in the latest version of ASTM D3350. The material

formulation shall include recycled polyethylene.

Installation

For gravity-flow drainage applications, installation shall be in accordance with ASTM D2321 and ADS

recommended installation guidelines with the exception that minimum cover in traffic areas shall be one

foot (0.3 m). For leachfield applications, installation shall be in accordance with ASTM F481 and as

regulated by regional, state, and local agencies. Proper authorization for specific applications and

designs should be obtained prior to installation to ensure suitability in certain locales. Contact your local

ADS representative or visit our website at www.adspipe.com for a copy of the installation guidelines.

Perforation Options*

Nominal Pipe I.D.

in (mm)

(100)

Average Pipe I.D.

in (mm)

3.875

(98.5)

Average Pipe O.D.

in (mm)

4.215

(107)

*Only available in a limited area. Check with your

sales representative for availability.

**Perforation sizes are based on customer

requirements and availability by region.

**All diameters available with or without perforations

White Skin

Black Core

O.D.

I.D.

Bell End

Spigot

Summary of content (1 pages)

PAGE 1
Specifications  1-25 ADS, Inc. Drainage Handbook ADS 3000 TRIPLEWALL® PIPE SPECIFICATION Scope This specification describes 4-inch (100 mm) ADS 3000 TripleWall pipe for use in gravity-flow drainage and leach field applications. Pipe Requirements ADS 3000 TripleWall pipe shall have a smooth interior and exterior. • 4-inch (100 mm) pipe shall meet the requirements of ASTM F810. • Manning's "n" value for use in design shall not be less than 0.009. Joint Performance Pipe joints shall be bell-and-spigot.