User Manual

AirFusion™ Inatable Kayak Owner’s Manual

Figure 2. Inate/Deate Twist Valve

To begin inating your kayak, you will need a Bellows Foot Pump or a Double Action Hand

Pump. Never use compressors, CO2 or compressed air as they may damage your kayak.

Diagram of Ination Chambers

3.4 Inating

IMPORTANT: Before inating, check to be sure that the kayak is completely assembled.

Inate your kayak in the following order. Failure to follow these instructions may cause

damage to your kayak. Do not over inate.

1. Locate the valves for the two boom side chambers. Make sure the valve body is screwed

in tightly. See Figure 1. Remove small cap and use the appropriate pump nozzle. If you

own an Advanced Elements pump you should have a screw on valve adaptor; if you do not

have this adaptor, you can obtain one by visiting our website at www. advancedelements.com.

This adaptor will aach to the valve; you must rst press t the adaptor to the valve and

OPERATINGTHE“TWIST”VALVES

TWIST TO OPEN / INFLATE / THEN CLOSE

TWIST VALVE

PUMP HOSE

INSERT

Chambers(2)

Boston Valve

Front Thwart

Chamber

Boston Valve

Rear Thwart

Chamber Boston 

Valve

Coaming Chamber

Twist Valve