User guide

113
5. Verify that the 430W NAV ARINC to EFIS interface is working
a. Press the ENTER button on the 430W to bypass the
Instrument Panel Self Test.
b. Press the CDI button on the 430W to switch to NAV
mode.
c. Verify that the EFIS CRS needle turned green and is
displaying the nav frequency from the 430W.
If the CDI did not turn green the AF-ARINC module is not receiving ARINC NAV data from
the 430W. Check the following connections:
ARINC DB-25 Function 430W
23 ARINC ILS/VOR 1-B 4006-23
11 ARINC ILS/VOR 1-A 4006-24
The ILS/VOR ARINC signals are not on the same 430W connector as the GPS signals!
They are wired to the 430W 4006 connector.
6. Verify that the EFIS can send commands to the Autopilot
a. Select the following Menu on the EFIS screen:
EFIS -> AP/FD
b. Select the Heading Bug for the Lateral mode: LAT HDG
c. Select the Altitude Bug for the Vertical mode: VER ALT
d. If the Flight Director is turned on it should have yellow wings and tips.
e. Select <-HDG-> from the knob list, center the heading bug .
f. Press the EFIS button on the Autopilot and verify that the AP display changes to "EFIS" or
"EXT.".