User guide

121
Flying an ILS Approach


















For the AP to capture and follow the ILS, the following procedure should be used.
1. ILS frequency active and verified in your Nav radio (110.90 in this example)
2. ILS inbound Approach Course (OBS) set using the CRS knob selection (218 in this example)
3. AP LAT mode in ARM
4. AP VER mode in ARM
5. Heading bug must be within +/- 40 deg of the Inbound Approach Course
6. Altitude bug must be below the glide-slope intercept altitude.
7. LOC CDI must be within 80% and you must be below the GS for the VER mode to change to NAV.









