User guide

14
EFIS Flight Display
Magnetic Heading Heading Bug Setting
Current G’s Vertical Speed
Airspeed Bug Setting Altitude Bug Setting
Pitch Angle Standard Rate Turn
Roll Angle
G METER Tape Vertical Speed Tape
True Airspeed Baro Set
Slip Ball Wind
AHRS Alignment (Gyro)
When power is applied to the system the EFIS display will have a large RED X while the AHRS in initializing.
The Aircraft should not be moved until the RED X disappears from the Screen (Approximately 40 seconds).
CAUTION:
If for any reason the RED X appears on the screen the Horizon Attitude, Heading, and Slip display MUST NOT
BE RELIED ON FOR PRIMARY NAVIGATION.
Dual AHRS Monitoring
If you have a dual screen system with two AHRS units you can configure the
screens to monitor both AHRS units. If a screen detects that there is an AHRS
mismatch error in Roll, Pitch, or Heading you will get an AHRS MISMATCH error displayed on the center of
the screen. See Dual AHRS configuration for proper setup.