User guide

43
The ABOUT Page
[CHECK] -> [MAINT] -> [ABOUT]
This page contains a lot very
important information about
your system.
System Info contains your
system Serial Number. This is
very important to have when
you call AFS for technical
support.
Next is your software version
information, IP address, and
installed keys.
MAP: Mapping
AOA: Angle of Attack
SVT: Synthetic Vision
Mapping Status gives you
the version of mapping
software, region, map
effective and expiration dates,
and status of the map Vector
and Terrain file.
System Status contains information related to how long your system has been powered-on for, how
many power cycles the unit has had over its life, your current GPS LAT/LON position, current magnetic
variation (received from the GPS), and the current synthetic vision altitude above the ground.
Weather Status shows information for diagnosing XM or ADS-B Weather module problems.
Mode: Shows the mode of that particular screen (MASTER or SLAVE).
Receiver ID: Shows the unique identification number of your receiver
Signal Strength: Indicates the current strength of the XM satellite signal
(NONE, POOR, AVERAGE, GOOD)
Antenna: Indicates whether or not an XM antenna is connected
Last Data: The elapsed time from the point of the last weather data received.
Note: Weather Status will not be shown if WX is set as OFFLINE in Instrument Calibration.