User guide

The moving map can be displayed as a partial screen along with the EFIS and/or Engine Monitor or as a

complete page. You can also select if the airspeed and altitude tapes and engine monitor are displayed on

the map from the

[MAP] -> [SETTINGS] menu and selecting the [AIR OFF] [Engine] buttons.

EFIS-Engine-Map Page Map Page Air & EMS OFF Map Page with Air ON EMS ON

Map Data Source

The current flight plan source that is displayed on the Map can be set from the following menu:

[MAP] -> [SETTINS] -> [SRC/???] where SRC/??? Can have the following options depending on the radios

installed in the aircraft:

SRC/GNAV1 430W/530W/480 GPS Navigator Radio setup as GPS 1

SRC/GPS2 External GPS unit setup as GPS 2

SRC/MAP Flight Plan activated from the EFIS Map

Private Airports

The [MAP] -> [SETTINGS] -> [MORE] -> [PVT ON/OFF] button gives you the option of displaying or not

displaying private airports on the moving map screen.

Intersections

The [MAP] -> [SETTINGS] -> [MORE] ->[INTS ON/OFF] button gives you the option of displaying or not

displaying Intersections on the moving map screen.

Zoom Range

The current zoom rang is displayed by an arc on the top of the map display with its current digital range. The

zoom range can be adjusted using the knob anytime [ZOOM] is displayed. The map software will

progressively declutter airports, intersections and obstacles from the screen as you zoom out farther.

Nearest Airport

Pressing the [NRST] button from the map menu will bring up a sorted list of the nearest eight airports

displayed on the screen at the current zoom level. If you want to see the actual closest airports you should

zoom in before pressing the [NRST] button. You can then use the knob so select the desired airport.

Pressing the [INFO] button will display the information for the highlighted airport.

CAUTION If you want to see the actual closest airports you should zoom in before pressing the [NRST]

button.

Direct To Navigation

Pressing the [-D->] button from the map menu will enable you to select the desired airport to navigate to by

using the knob.