User guide

61
TANKS FILLED
You can set the fuel computer to the programmed full tanks by pressing one of the following buttons in the
fuel computer:
1. [FILL MAINS] If only the main tanks have been filled
2. [FILL ALL] If the main and tip tanks have been filled
WARNING: If you press [FILL ALL] and have not added fuel to the tip tanks the fuel computer calculations will be
incorrect
You can add or subtract fuel to the computer by adjusting the [KNOB] for the correct amount and then
pressing the [ADJ] button.
% Power Display
The system will display the estimated %Power using the Horsepower table in instrument calibration. You will
need to configure the settings by using the appropriate data from your engine manual.