User guide

66
Rotate the right knob to BACKUP (if you want to copy it to your SD card) or RESTORE (if you want to copy
the file from your SD card to your EFIS) and press START
Weight & Balance Screen
The Weight & Balance page is selected from the following
menu:
[CHECK] -> [MAINT] -> [BALANCE]
The PREV & NEXT buttons are used to select the station and
the knob is used to adjust the weight of the station or volume
for fuel.
The Weight & Balance settings are controlled by the files:
AIRCRAFT.AFD Stations, Weights, Screen Location
AIRCRAFT.AFB Standard .BMP of the aircraft picture.
You can transfer the files to and from the SD card from the
EFIS Calibration startup screen (CHECK -> MAINT ->
ADMIN ->CALIBRATION).
1. Admin Settings
1. Transfer Files
4. Weight & Balance
The normal weight & balance settings can be adjusted on the
Weight & Balance page by pressing the [STATIONS] button.
The X and Y on the stations page is the screen coordinates for
the text on the aircraft bitmap. The Aircraft Type, Gross Weight
and CG Range will need to be modified using Microsoft Word
Pad and editing the AIRCRAFT.AFD file on a PC.
The aircraft bitmap can be changed using Microsoft Paint and
editing the AIRCRAFT.AFB file, do not change the overall
dimensions of the Bit Map.