User guide

14. AHRS Module Config HW:INT, NET:TXD

15. Network IP Number this screen 176

16. Network IP Number Other screen 175

<Example #3> AF-3500EF EFIS and AF-3500EE EFIS-Engine Monitor and AF-3400MFD

AF-3000/4000EF EFIS Screen #1

1. Admin Settings

12. Engine Module Config HW:OFF, NET:RXD

13. Air Module Config HW:INT, NET:TXD

14. AHRS Module Config HW:INT, NET:TXD

15. Network IP Number this screen 175

16. Network IP Number Other screen 176

AF-3000/4000EE EFIS-Engine Monitor Screen #2

1. Admin Settings

12. Engine Module Config HW:INT, NET:TXD

13. Air Module Config HW:INT, NET:OFF

14. AHRS Module Config HW:INT, NET:TXD

15. Network IP Number this screen 176

16. Network IP Number Other screen 175

AF-3000/4000MFD Screen #3

1. Admin Settings

12. Engine Module Config HW:OFF, NET:RXD

13. Air Module Config HW:OFF, NET:RXD

14. AHRS Module Config HW:OFF, NET:RXD

15. Network IP Number this screen 177

16. Network IP Number Other screen 176

Dual Screen Data Configuration

Any time engine or EFIS settings are changed you should transfer the files to both screens. One screen can

get some of the configuration files from the neighboring screen in the Admin Menu. If both screens are on

the Admin Page in the EFIS Calibration menu, select:

14. Request Remote Files

This will force the screen to get the configuration data files from the remote screen for those items that this

screen is setup to receive and will reboot with the new files.

If the screen is setup to receive Air Module Data the following files will be transferred:

AIRDATA.AFD Airspeed, Altimeter, System Voltages

AOA.AFC AOA Calibration

If the screen is setup to receive Engine Data the following files will be transferred:

ENGINE.AFD Engine Gauges

TANKS.AFC Engine Gauges

Note: This works on non-S CPU units only. Units with the s-CPU must have the files transferred

manually through Calibration Menu -> Admin Settings -> Transfer Files To/From SD Card