User Manual

16
9.2.8 Tag Note Tab
You can add more tag details which you read by unit in this tab and the tag data
will be stored in database. You can access to this tab by double click on any row
of Tag ID when you are in Download tab.
To add details into tag
- click on tag ID you want(a row next to that ID will be prompt)
- input data
- click on Green Tick button to confirm
You can create new Note file, Save(AAN file), and Print
your AID file with these 3 buttons .
Note : AID file is a default data format for RFID Note.
You can move to Download tab by clicking on Blue arrow
button(save and back), and confirm changing any details in this
tab with Green tick button.(save, update and back)
You can add New Row or Delete Row with these buttons.
You can browse file location with by clicking on File path button
9.2.9 Help tab
This tab contains Users Interface Description documents, RFID Note software
details others support software descriptions, and Firmware support details.
9.3 Programming new firmware into HH500 Reader
RFID Handheld reader HH500 can be programmed by users. This chapter will
describe how to program it with FlashSTA software.
Note : Support software are in AAE Support CD. (see in packing contents
)
DISCLAIMER: This command will erase all data in the unit’s memory.
Users understand this and accept the risks – Advanced ID Corporation will
not be response for any loss of data through the use of this software; use at
your own risk.
9.3.1 Connect the unit
- connect the Unit to PC with RS232 communication cable.
(male side connect to unit and female side connect to pc)
- switch “ON” the unit
- slide Program Switch to Start position (see picture below)
Note : When the switch is moved to Start position, the unit’s LCD will be still. But
when it is moved to End position, the unit’s LCD will show unit’s firmware version.
Slide right
to END
Slide left to
Start