User Manual

AFG ASIA ENGINEERING CO.LTD.
65/12 M.10 T.Tonpao A.Sankumpang
Chiangmai, Thailand 50130
Tel: [phone]
Fax: [phone]
Page 7
PR500
User manual
Released
Ref. - (PR500 readers) Rev. 1_01 2008-03-13
Download Software version1.0.0.0” (this document will explain it in the next chapter). The
contents of the information are as below:
Name Description
Record number The address in flash memory that the tag was
stored.
Date Date when the tag was read.
Time Time when the tag was read.
Tag type Type of the tag(ISO18000/6B or
ISO18000/6C)
Action The action mode(READ or WRITE or FIDE)
Display The read field of data(ID, DATA, TID,
RESERV)
ID ID of the tag
Start address If user is in “READ DATA” or “WRITE DATA”
mode, this field will identify which address of
the tag is the start address for reading/writing.
Data length If user is in “READ DATA” or “WRITE DATA
mode, this field will identify how long of the
data that user read/write from the start
address to the end of data.
Note: the maximum is 32bytes
Data If user is in “READ DATA” or “WRITE DATA
mode, this field will identify the data in the tag.
3.3 Writing data/ID
The PR500 RFID allows user to write data/ID into RFID tags. However, user needs to know
first which RFID tag type that they are using (ISO18000/6B or ISO18000/6C).
For writing data into tags ISO18000/6B type, user has to go to “ISO-6B WRITE DATA(H)” or
“ISO-6B WRITE DATA(A)*” by pressing the “TAG TYPE” button to select “ISO-6B” type and
then press the “OPERATION” button.
Note: *(A) means the reader will show data in ASCII characters (0-9, A – Z).